TECNO CAMON 11 PRO { CF8 } FACTORY SIGNED FIRMWARE TESTED AND WORK 100%

Tecno Camon 11 Pro features

• Dimension: 156.65 x 76.05 x 5.6 mm (H x W x D)
• Display: 6.2-inch Super FullView display in HD+ (1500 x 720 pixels) resolution and 19:9 aspect ratio
• Internal Storage: 64GB ROM
• RAM: 6GB RAM
• Selfie: 24MP Front Camera with Flash, Face ID, and AR Emoji
• Rear Camera: Dual 16MP+ 5MP with Quad Flash
• CPU: 2.0GHz Octa-Core MediaTek MT6762
• Operating system: HiOS v4.1, based on Android v8.1 Oreo
• Battery: 3750 mAh
• Sensors: G-Sensor, Ambient Light Sensor, Proximity Sensor, Fingerprint Sensor

 This Firmware,

• Can  unbrick your phone
• Fix the Boot loop problem
• upgrade and Downgrade your phone
• Unroot and Fix Bugs on your phone
• To fix stutter
• can solve software errors by flashing Stock ROM.
• To gain your device warranty Back

How To Flash Tecno Camon 11 Pro CF8 Factory Firmware With Sp Flash tool

• Download the Factory  Firmware From link bellow on your personal computer.
• Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
• Download and Launch the Smart Phone Flash Tool(Sp Flash tool) or other tool like Nckdongle or Cm2 etc

•  Load Da (Download Agent) file if the phone is secure boot

• Click the Scatter-loading button on Sp flash tool to navigate to the stock Rom you just downloaded on your Pc or Use other tool as instructed by tool.

• Select the Scatter File from the extracted Stock Firmware on your computer.
• Select the Download Only in the SP flash tool, this will reduce risk of killing the phone
• Click the Download button to start the Flashing process.

• Connect your device via USB to the computer, flashing process will starting working
• Patiently wait for your device to complete flashing.
• After the Flashing process  is done, a Big Green button will pop up on the SP Flash to show that flashing process is complete successfully.

• Unplug your device, remove battery if removable otherwise wait for a second then power on.
• If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
• Flashing process completely  successfully enjoy!

How To Flash Tecno Camon 11 Pro CF8 Factory Firmware With Tecno after sales Download flash tool (SWD),

• Download Factory  Firmware From link bellow on your personal computer.
• Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
• Download and Launch Tecno after sales flash tool

• Click on settings icon to load scatter file

• Choose Download only to preserve user Data if you want otherwise use other options but not Format all and download
• Click on Play button after scatter file loading

• Checksum will  verify all files  wait till it complete

• Connect your device via Usb to start Flashing proccess
• Flashing process begins wait until process complete don't unplug your device,by doing that your phone will be killed.

• Green text will appear, this will shows that flashing process completely   successfully 

• Now Enjoy!