Home » , » TECNO SA1 FACTORY FIRMWARE TESTED AND WORK 10000%

TECNO SA1 FACTORY FIRMWARE TESTED AND WORK 10000%

Posted by Android Techpedia on Tuesday, October 2, 2018






TECNO  SA1  FACTORY FIRMWARE.
  • Internal Memory: 8GB/ 1 GB RAM
  • Operating System: Android 8.1 (GO Edition)
  • Processor: Quad-core 1.3 GHz
  • Network: GSM/WCDMA
  • Dimensions: 123.5 x 65 x 9.95 mm
  • Display: 4.0 inches WGA Touchscreen
  • Resolution: 800 x 480 pixels
  • Camera: 2MP rear with flash/ 0.3 MP
  • Connectivity: Wi-Fi/ Bluetooth
  • Sensors: G-sensor
  • Battery: 1500 mAh


 How To Flash Tecno SA1 Factory Firmware With Sp Flash tool.

REQUIREMENT'S;

  • A working detectable USB Cord.
  • A Windows PC.
  • A Good Battery up to 75%
   STEP'S TO FOLLOW'S;
  • Download the Factory  Firmware From link bellow on your personal computer.
  • Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
  • Download and Launch the Smart Phone Flash Tool(Sp Flash tool) or other tool like Nckdongle or Cm2 etc


  •  Load Da (Download Agent) file if the phone is secure boot

  • Click the Scatter-loading button on Sp flash tool to navigate to the stock Rom you just downloaded on your Pc or Use other tool as instructed by tool.


  • Select the Scatter File from the extracted Stock Firmware on your computer.
  • Select the Download Only in the SP flash tool, this will reduce risk of killing the phone
  • Click the Download button to start the Flashing process.



  • Connect your device via USB to the computer, flashing process will starting working
  • Patiently wait for your device to complete flashing.
  • After the Flashing process  is done, a Big Green button will pop up on the SP Flash to show that flashing process is complete successfully.



  • Unplug your device, remove battery if removable otherwise wait for a second then power on.
  • If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
  • Flashing process completely  successfully enjoy!

How To Flash Tecno SA1 Factory Firmware With  after sales Download flash tool (SWD),

  • Download Factory  Firmware From link bellow on your personal computer.
  • Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
  • Download and Launch Tecno after sales flash tool


  • Click on settings icon to load scatter file


  • Choose Download only to preserve user Data if you want otherwise use other options but not Format all and download
  • Click on Play button after scatter file loading


  • Checksum will  verify all files  wait till it complete


  • Connect your device via Usb to start Flashing proccess
  • Flashing process begins wait until process complete don't unplug your device,by doing that your phone will be killed.


  • Green text will appear, this will shows that flashing process completely   successfully 


  • Now Enjoy!

REMEMBER;

      .To backup Nvram
      .Security Items 
    

ADVANTAGES OF FLASHING TECNO SA1 (S2) WITH THIS  FACTORY  FIRMWARE. 
  •     Fix dead boot on devices due to wrong firmware flashed initially
  •     Fix/Repair IMEI on your device using the DB files in the  factory firmware
  •     Remove Monkey Virus/other malware
  •     Fix hang on logo, rebooting or restarting
  •     Restore devices to their factory state
  •     Completely un-root your device
  •     Fix unfortunately, app has stopped
  •     Fix network related issues
  •     LCD Display issues
  •    Fast boot mode













0 komentar:

Post a Comment

Popular Posts

Blog Archive

.comment-content a {display: none;}