TECNO F2 LITE FACTORY FIRMWARE

SPECIFICATION OF TECNO F2 LTE

LAUNCH
・Announced: June, 2018
・Status: Available. June, 2018

NETWORK
・Network Technology: GSM / WCDMA / LTE
・3G Support: 850/1700/1900/2100
・4G Support: LTE: B1/B3/B7/B20 TDD
・Number of SIM Card: 2 (Nano)
・Dual SIM Support: Yes

DESIGN
・Material Type: Plastic
・Dimensions: 143.8 x 73.94 x 9.55 mm
・Colour: Black, Gold, Blue
・Weight: –

DISPLAY
・Screen Type: FWVGA IPS capacitive touchscreen
・Size: 6-inch
・Resolution: 854 x 480 pixels
・Pixel Density: –
・Screen to Body Ratio: –

SOFTWARE
・Operating system: Android 8.1 Go
・Processor: Quad-core 1.3GHz
・Chipset type: MediaTek
・Graphics Processing Unit: Mali

STORAGE
・Memory Card slot: Yes, up to 32GB
・Internal storage: 8GB
・RAM: 1GB

CAMERA
・Back Camera: 5MP
・Front Camera: 5MP
・Back Flash: Yes, dual-LED
・Front Flash: Yes

FEATURES
・Wifi Hotspot: Yes
・Bluetooth: Yes
・Fingerprint Sensor: Yes (Rear)
・Sensors: accelerometer, proximity, ambient light, gyroscope
・USB: Yes
・GPS: Yes
・3.5mm Audio Jack: Yes

BATTERY
・Capacity: 2400mAh
・Type: Li-Ion
・Standby Time: –
・Talktime: –
・Fast Charging: No

How To Flash Tecno KA70 Factory Firmware With Sp Flash tool

Download the Factory Firmware From link bellow on your personal computer.
Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
Download and Launch the Smart Phone Flash Tool(Sp Flash tool) or other tool like Nckdongle or Cm2 etc

Load Da (Download Agent) file if the phone is secure boot

Click the Scatter-loading button on Sp flash tool to navigate to the stock Rom you just downloaded on your Pc or Use other tool as instructed by tool.

Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool, this will reduce risk of killing the phone
Click the Download button to start the Flashing process.

Connect your device via USB to the computer, flashing process will starting working
Patiently wait for your device to complete flashing.
After the Flashing process is done, a Big Green button will pop up on the SP Flash to show that flashing process is complete successfully.

Unplug your device, remove battery if removable otherwise wait for a second then power on.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Flashing process completely successfully enjoy!

How To Flash Tecno F2LITE Factory Firmware With Tecno after sales Download flash tool (SWD),

Download Factory Firmware From link bellow on your personal computer.
Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
Download and Launch Tecno after sales flash tool

Click on settings icon to load scatter file

Choose Download only to preserve user Data if you want otherwise use other options but not Format all and download
Click on Play button after scatter file loading

Checksum will verify all files wait till it complete

Connect your device via Usb to start Flashing proccess
Flashing process begins wait until process complete don't unplug your device,by doing that your phone will be killed.