B1-F8018BC-GO-181117V124
TECNO POP 2(B1) FEATURES
- OS: Android 8.1 (GO edition)
- SIM Type: Dual sim (Micro)
- 4G LTE: No
- Screen Size : 5.5 FULLVIEW touchscreen
- Screen Resolution: 960 X 480 pixels
- Processor Type: Quad-core 1.30 GHz, MediaTek MT6580A
- RAM: 1GB
- Internal Storage: 8GB
- External Storage: microSD, up to 32GB
- Back / Rear Camera: 5MP camera & LED Flash
- Front Camera: 8MP with LED flash
- Battery: 2400 mAh (non-removable)
How To Flash Tecno POP 2 B1 Factory Firmware With Sp Flash tool
- Download the Factory Firmware From link bellow on your personal computer.
- Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
- Download and Launch the Smart Phone Flash Tool(Sp Flash tool) or other tool like Nckdongle or Cm2 etc
- Load Da (Download Agent) file if the phone is secure boot
- Click the Scatter-loading button on Sp flash tool to navigate to the stock Rom you just downloaded on your Pc or Use other tool as instructed by tool.
- Select the Scatter File from the extracted Stock Firmware on your computer.
- Select the Download Only in the SP flash tool, this will reduce risk of killing the phone
- Click the Download button to start the Flashing process.
- Connect your device via USB to the computer, flashing process will starting working
- Patiently wait for your device to complete flashing.
- After the Flashing process is done, a Big Green button will pop up on the SP Flash to show that flashing process is complete successfully.
- Unplug your device, remove battery if removable otherwise wait for a second then power on.
- If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
- Flashing process completely successfully enjoy!
How To Flash Tecno POP 2 B1 Factory Firmware With Tecno after sales Download flash tool (SWD),
- Download Factory Firmware From link bellow on your personal computer.
- Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
- Download and Launch Tecno after sales flash tool
- Click on settings icon to load scatter file
- Choose Download only to preserve user Data if you want otherwise use other options but not Format all and download
- Click on Play button after scatter file loading
- Checksum will verify all files wait till it complete
- Connect your device via Usb to start Flashing proccess
- Flashing process begins wait until process complete don't unplug your device,by doing that your phone will be killed.
- Green text will appear, this will shows that flashing process completely successfully
- Now Enjoy!
0 komentar:
Post a Comment