LB6-H8025PQ-GO-190110V144
TECNO POUVOIR 2 AIR SPECIFICATIONS
- OS: Android 8.1 (Oreo) With HiOS
- SIM Type: Dual SIM (Micro-SIM, dual stand-by)
- 4G LTE: YES, LTE
- Screen Size: 6.0 Inches capacitive touchscreen, 16M colours
- Screen Resolution: 1440 x 720 pixels (~304 ppi density)
- Processor Type: Quad-core 1.3 GHz, MediaTek chipset
- RAM: 2GB
- Internal Storage: 16GB
- External Storage: microSD, up to 32 GB
- Back / Rear Camera: Dual: 13 MP
- Front Camera: 8MP
- Battery: 5000 mAh (non-removable)
How To Flash Tecno POUVOIR 2 AIR (LB6) Factory Firmware With Sp Flash tool
- Download the Factory Firmware From link bellow on your personal computer.
- Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
- Download and Launch the Smart Phone Flash Tool(Sp Flash tool) or other tool like Nckdongle or Cm2 etc
- Load Da (Download Agent) file if the phone is secure boot
- Click the Scatter-loading button on Sp flash tool to navigate to the stock Rom you just downloaded on your Pc or Use other tool as instructed by tool.
- Select the Scatter File from the extracted Stock Firmware on your computer.
- Select the Download Only in the SP flash tool, this will reduce risk of killing the phone
- Click the Download button to start the Flashing process.
- Connect your device via USB to the computer, flashing process will starting working
- Patiently wait for your device to complete flashing.
- After the Flashing process is done, a Big Green button will pop up on the SP Flash to show that flashing process is complete successfully.
- Unplug your device, remove battery if removable otherwise wait for a second then power on.
- If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
- Flashing process completely successfully enjoy!
How To Flash Tecno POUVOIR 2 AIR (LB6) Factory Firmware With Tecno after sales Download flash tool (SWD),
- Download Factory Firmware From link bellow on your personal computer.
- Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
- Download and Launch Tecno after sales flash tool
- Click on settings icon to load scatter file
- Choose Download only to preserve user Data if you want otherwise use other options but not Format all and download
- Click on Play button after scatter file loading
- Checksum will verify all files wait till it complete
- Connect your device via Usb to start Flashing proccess
- Flashing process begins wait until process complete don't unplug your device,by doing that your phone will be killed.
- Green text will appear, this will shows that flashing process completely successfully
- Now Enjoy!
0 komentar:
Post a Comment