Infinix Hot 7 Specifications,
- 6.2-inch IPS LCD capacitive touchscreen, 720 x 1440 pixels
- Android 8.1 Oreo, 1GB/2GB of RAM
- Mediatek MT6580P, Quad-core 1.3GHz
- 16GB built-in storage, 1 GB RAM
- 13MP rear camera and 8MP selfie camera
- 4,000mAh non-removable battery
HOW TO FLASH INFINIX HOT 7 X624,
How To Flash Infinix hot 7 x624 Factory Firmware With Sp Flash tool
- Download the Factory Firmware From link bellow on your personal computer.
- Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
- Download and Launch the Smart Phone Flash Tool(Sp Flash tool) or other tool like Nckdongle or Cm2 etc
- Load Da (Download Agent) file if the phone is secure boot
- Click the Scatter-loading button on Sp flash tool to navigate to the stock Rom you just downloaded on your Pc or Use other tool as instructed by tool.
- Select the Scatter File from the extracted Stock Firmware on your computer.
- Select the Download Only in the SP flash tool, this will reduce risk of killing the phone
- Click the Download button to start the Flashing process.
- Connect your device via USB to the computer, flashing process will starting working
- Patiently wait for your device to complete flashing.
- After the Flashing process is done, a Big Green button will pop up on the SP Flash to show that flashing process is complete successfully.
- Unplug your device, remove battery if removable otherwise wait for a second then power on.
- If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
- Flashing process completely successfully enjoy!
How To Flash Infinix hot 7 x624 Factory Firmware With Tecno after sales Download flash tool (SWD),
- Download Factory Firmware From link bellow on your personal computer.
- Install the Usb (Media tek) Mtk Drivers (skip if you have it ).
- Download and Launch Tecno after sales flash tool
- Click on settings icon to load scatter file
- Choose Download only to preserve user Data if you want otherwise use other options but not Format all and download
- Click on Play button after scatter file loading
- Checksum will verify all files wait till it complete
- Connect your device via Usb to start Flashing proccess
- Flashing process begins wait until process complete don't unplug your device,by doing that your phone will be killed.
- Green text will appear, this will shows that flashing process completely successfully
- Now Enjoy!
FIRMWARE SOLVES,
- Unroot or Fix Bugs on the phone
- Update and Downgrade
- Remove Password or Pattern
- Remove Frp (Factory reset protections)
- Boot loop issue
- Api 3 Error
0 komentar:
Post a Comment